Rails BY SEFACO

Download an Acrobat version of this page

Welcome to the world of PVC EXPERT, low maintenance Railing System.

Assembly instructions
Two methods of anchoring are possible :

	Cement
	Metal supports

Note: If you decide to use cement as opposed to metal supports, you will need to insert 2 well-anchored reinforcement bars for each post into your deck or balcony floor.

Step 1 Determine the position of your posts. They should be more or less 1 1/2" from the edge. Secure the optional metal supports to your balcony or deck. Make sure they are plumb.
Step 2 Slide the base of the PVC post into the base cover as shown.
Step 3 Slide de PVC post and its base cover over the metal support.
Step 4 Measure the distance between each post and add 1 3/4" to each end. This will be the required length of your rail sections.
Step 5 Your rails have been shipped with metal inserts. They will need to be cut to the length measured in step 4. In a "start" or "end" post, your must insert the small 1 1/2" x 7/8"PVC piece. This will prevent the rail from moving.

| Next Page |

Sefaco inc is a division of DCN Plastic